Protean 'Inside-Out' Wheel Motor Design: A Company To Watch? Page 2

Follow John

Protean motors for Brabus Hybrid E-Class

Then, at this spring's EVS-26 electric vehicle symposium, we ran into Protean again.

This time, they had a sportier vehicle: a Brabus Mercedes-Benz E-Class that had been turned into a plug-in hybrid with the addition of a battery pack and a pair of Protean motors, one in each rear wheel.

Like the Ford F-150, the Brabus Hybrid E-Class showed that a Protean motor would fit into an existing wheelwell, allowing electric drive to be added without changing the drivetrain to accommodate a single electric motor to power a pair of wheels via drive shafts.

The Brabus Hybrid is powered by a 2.2-liter turbodiesel engine, supplemented by the peak 220 hp output and 1,180 lb-ft of peak torque from the pair of wheel motors, powered by an 18-kWh lithium-ion battery pack in the trunk. 

The result, according to Protean and Brabus, is a 0-to-62-mph time of 7.4 seconds and, even better, acceleration from 37 to 75 mph in less than 6 seconds.

Four Protean wheel motors were also used in Brabus Full Electric variants--both an E-Class sedan and E-Class wagon--which produced an all-wheel drive E-Class with peak power of 320 kW (430 hp) and an almost unbelievable 2,350 lb-ft of torque.

It's the suspension, stupid

In-wheel motors solve a lot of packaging problems for automakers, especially in the kind of plug-in hybrid retrofits to existing vehicles that Protean has demonstrated.

Protean Electric converted Ford F-150 pickup truck, Detroit, October 2010

Protean Electric converted Ford F-150 pickup truck, Detroit, October 2010

Enlarge Photo

But they create some other problems, chief among them what's called "unsprung weight," or the much greater mass the vehicle's suspension must accommodate.

The greater the unsprung mass, the more noise and vibration from road surfaces and potholes has to be handled by the suspension, requiring heavier components and increased attention to suppressing noise, vibration, and harshness.

Two years ago, Protean sponsored a study by Lotus on the suspension dynamics of wheel motors, also summarized less technically here.

It appears to indicate that some of the effects simply come in different parts of the frequency cycle than generally thought, and that some of the problems are solvable by careful suspension tuning.

Truly revolutionary?

Much more study of the suspension implications will clearly be needed.

But, say experts, development of a truly innovative wheel motor could be as important a breakthrough for electric cars as new chemistries and lower-cost cells for lithium-ion batteries.

With the kind of floorpan battery packs used in dedicated battery electric cars like the Nissan Leaf and Tesla Model S, powerful and cost-effective wheel motors would allow virtually all the car's interior volume to be used for passengers and their goods.

Only the power electronics and various cooling systems would have to be accommodated inside the vehicle envelope.

For now, plug-in hybrids

Brabus' Technology Project Hybrid, using Protean in-wheel motors.

Brabus' Technology Project Hybrid, using Protean in-wheel motors.

Enlarge Photo

In the near term, Protean is focusing on its plug-in hybrid applications, especially those that can easily be added within existing vehicle designs.

In Europe, the company has shown its in-wheel motors added to the rear axle of a diesel Vauxhall Vivaro European front-wheel drive delivery van.

With the addition of a 21-kWh lithium-ion battery pack, the Protean motors powered the electrified Vivaro up to 55 miles on electricity. In mixed usage, Protean said fuel efficiency rose a factor of three.

Moving toward 2014 production

As well as the new $84 million of funding, additional funds and incentives will come from the city of Liyang, China, where the company will build its innovative motors.

"With this round of investment in place," said Bob Purcell, chairman and CEO of Protean Holdings, "Protean Electric is now positioned to move aggressively to production and into the market."

The vision, Purcell says, is to make Protean "the world leader for in-wheel electric drive," with the ability to supply motors directly in low volumes and licensing its technology to partners for manufacturing at higher volumes.

Production of Protean motors in China is expected to start early next year, with volume manufacturing targeted for 2014.

Purcell, it should be noted, is no stranger to electric cars, having worked on the seminal GM EV1 program in the 1990s.

Protean's antecedents in the U.K. actually date back to 1963, via several corporate consolidations and spinouts. Oak Investment acquired majority control of the company in 2009.

+++++++++++

Follow GreenCarReports on Facebook and Twitter.


 
Follow Us

Commenting is closed for this article

Take Us With You!

 


 
© 2017 Green Car Reports. All Rights Reserved. Green Car Reports is published by Internet Brands Automotive Group. Stock photography by izmostock. Read our Cookie Policy.