Audi has brought a supercar electric vehicle concept to Frankfurt with specs that dazzle and technology that highlights the future direction of EVs.

The Audi e-tron concept on display in Frankfurt packs a lot into its R8 supercar based platform.  The vehicle includes 4 electric motors that offer independent power to each wheel making the vehicle a true Quattro, in line with other Audi products.  The motors output a modest 313 hp but an earth pounding claimed 3,319 lb-ft of torque.  Audi claims the vehicle cans reach 62 mph in 4.8 seconds and run from 37-75 mph in just 4.1 seconds.

The e-tron is powered by a 53 kWh lithium-ion battery pack of which 42.4 kWh is usable by the vehicle.  The total pack weight comes in at 1,036 pounds, but the vehicle still weighs in at a reasonable 3,527 pounds.

Even with dazzling performance numbers and high levels of both hp and torque, the e-tron can travel up to 154 miles on a single charge.  A feat that is due in large part to battery size and according to Audi, a focus or aerodynamics, rolling resistance, and thermal efficiency of the battery module and related components.

Right now, this spectacular product from Audi is concept only.  The company has repeatedly played down the importance of electric vehicles and has not stated any intentions to produce such a vehicle.  For a company displaying  little interest in EVs and hybrids, Audi has sure presented quite a product.  If the vehicle enters production, it could give the Tesla model lineup a challenge as well as other soon to be released supercar category plug-ins and EVs.

To learn more about the Audi e-tron, refer to the extensive press release from Audi listed below. 

Source:  Audi Press Release

The highly anticipated Audi concept showcases the performance sports car
capabilities of electric vehicle technology

FRANKFURT, Sept. 15 /PRNewswire/ -- Audi presents the highlight of the IAA
2009: the e-tron, a high-performance sports car with a purely electric drive
system. Four motors - two each at the front and rear axles - drive the wheels,
making the concept car a true quattro. Producing 230 kW (313 hp) and 4,500 Nm
(3,319.03 lb-ft) of torque, the two-seater accelerates from 0 to 100 km/h (0 -
62.14 mph) in 4.8 seconds, and from 60 to 120 km/h (37.28 - 74.56 mph) in 4.1
seconds. The lithium-ion battery provides a truly useable energy content of
42.4 kilowatt hours to enable a range of approximately 248 kilometers, or 154
miles.

The performance figures are by no means the only evidence of the consistent
and holistic strategy. The design makes it clear that the e-tron belongs in
the major leagues of sports cars, and the package takes into account the
specific realities of an electric vehicle. The battery is directly behind the
passenger cabin for an optimal center of gravity and axle load distribution.

The e-tron is able to freely distribute the powerful torque of its four
electric motors to the wheels as required. This torque vectoring allows for
dazzling dynamics and an undreamed-of level of agility and precision when
cornering.

Audi has taken a new, and in some cases revolutionary, approach to many of the
technical modules. A heat pump is used to efficiently warm up and heat the
interior. The drive system, the power electronics and the battery are
controlled by an innovative thermal management system that is a crucial
component for achieving the car's range without compromising its high level of
interior comfort. Networking the vehicle electronics with the surroundings,
which is referred to as car-to-x communication, opens new dimensions for the
optimization of efficiency, safety and convenience.

The Concept

Electric drive systems are still very much outsiders. The first vehicles of
this type took to the roads around 1900, yet in 2009 no volume car
manufacturer has a car powered exclusively by batteries in its lineup. Fewer
than 1,500 electric vehicles are currently registered in Germany,
corresponding to only 0.035 percent of all registered vehicles.

Yet electric driving potentially offers numerous advantages. Electric cars
reduce the dependence of transportation and the economy on the raw material
petroleum. They produce no direct exhaust emissions and thus ease the local
burden on the environment. Electric drive systems are also significantly more
efficient than combustion engines, consequently making them easier on the
customers' wallets. Other strengths include sportiness and the fun they bring
to driving. All of the torque is essentially available the moment the driver
steps on the accelerator, allowing for breathtaking acceleration.

There is still a lot of work to do before electric cars are ready for volume
production, however. The greatest challenge is the integration of the energy
storage system. Acceptable range and performance requires a traction battery
that is heavy and takes up a lot of space. Audi is taking a new approach to
offset these disadvantages - a holistic approach with a specific vehicle
package, a systematic lightweight construction concept and an optimal
configuration of all components for the electric drive.

Audi e-tron - The Holistic Approach

The most important development related to batteries for electric drives are
lithium-ion cells. Numerous experts throughout the world are working on their
further development for use in cars, with the primary objectives being to
reduce weight and increase capacity and performance. Audi has also opted for
this technology, both for use in a hybrid production vehicle, such as the
upcoming Q5 hybrid, and in the e-tron test platform.

The requirement specification for the concept vehicle goes far beyond battery
technology and the replacement of the combustion engine with an electric drive
system, however. The Audi development engineers decided back in the concept
phase to design practically every component and technology based on the new
requirements of electric mobility. The interaction of all elements has a
decisive influence on the factors efficiency, range and practicality.

The Audi team therefore focused its attention on the total vehicle, which is
reflected in the comprehensive requirement specification.

    --  The reduction of road resistances and the resulting increase in range
        plays a major role with electric vehicles. Lightweight construction
was
        therefore a top priority for the e-tron concept car. The body, in
        particular, combines low weight with supreme strength and rigidity. An
        intelligent aerodynamics concept with active elements helps to reduce
        consumption.
    --  The package ensures the safe integration of the electric drive system
        and the battery. Placing the battery in front of the rear axle ensures
        an optimal axle load distribution without compromising the compact
        overall design and the generous amount of interior space.
    --  Advanced battery technology enables a practical range. The battery
        system is water-cooled for optimal performance and service life.
    --  A needs-based energy management system controls all functions for the
        chassis, convenience equipment and other auxiliary consumers.
    --  The innovative thermal management system with optimally matched
cooling
        and heating components considers the cooling requirements of the
battery
        and the drive system in addition to the interior temperature.
    --  Driving dynamics and road comfort are what Audi customers have come to
        expect in the sports car segment.
    --  Vehicle safety is on par with the best of today's production
        vehicles.
    --  The driver is provided with clear and comprehensive information.

    --  The e-tron concept car uses car-to-x communication technology
developed
        by Audi to improve the efficiency of conventionally powered vehicles.
        For example, information about traffic light cycle times and the flow
of
        traffic - provided by the infrastructure and other vehicles - is used
to
        compute an optimal driving strategy. Audi has already modeled such a
        solution in Ingolstadt as part of its "travolution" project.

Design and Package

The caliber of the car is apparent to the observer at first glance. The Audi
e-tron has a wide, powerful stance on the road. The car body seems almost
monolithic; the closed rear end appears powerful and muscular. The trapeze of
the single-frame grille dominates the front end and is flanked by two large
air intakes. The top of the grille merges into the flat strips of the adaptive
matrix beam headlamp modules with their clear glass covers. High-efficiency
LED technology is used for all lighting units - a matter of honor for Audi as
the worldwide pioneer in this field.

The headlamps are the core of a fully automatic light assistance system that
reacts flexibly to any situation. The new technology recognizes weather
conditions and adapts the illumination to rain or fog. The technology at the
heart of the light assistance system is a camera that works together with a
fast computer to detect oncoming traffic, recognize lanes and measure
visibilities, such as in the event of fog.

If there is oncoming traffic, for example, the high beams are turned off in
the corresponding section of the illumination field. The cornering light
system analyzes data from the navigation system and illuminates corners before
the driver steers into them. The Audi e-tron does not have conventional fog
lamps that consume additional power. It instead intelligently varies the low
beams to widen the illumination field, thus significantly reducing the glare
from the car's own lights.

The variability of the headlamps is also reflected in their design. The LED
elements change appearance and thus the character of the front end of the
vehicle depending on the speed driven and the ambient conditions. The
innovative lighting technology offers the Audi designers almost as much design
freedom as the shape of the body does.

New design elements unique to the e-tron are the air intakes in the
single-frame grille and in front of the rear wheel wells. They are closed
flush under normal circumstances and opened by means of flaps when additional
cooling air is required. Maximum efficiency is also the reason behind this
measure. The concept car has a remarkably low drag coefficient, which gets
even better when the flaps are closed.

The vehicle body is compact. The sweeping line of the front end and the flat
curved roof immediately identify the two-seater as an Audi. The contours of
the flanks are familiar. The tapering of the dynamic line above the sill and
the shoulder line tie together the front end, the side and the rear, lend a
plastic quality to the doors and the transition to the side air intake and
sharply emphasize the Audi-typical round wheel wells with the large, 19-inch
tires.

At 1.90 meters (74.80 in) wide, just 4.26 meters (167.72 in) long and 1.23
meters (48.43 in) tall, Audi e-tron has the proportions of a supercar. The
wheelbase of 2.60 meters (102.36 in) leaves plenty of room between the axles
for people and technology. Like with a mid-engined sports car, the cabin of
the e-tron is shifted far forward toward the front axle, leaving room in front
of the rear axle for the roughly 470 kilogram (1,036.17 lb) battery unit, the
inverter and the power electronics.

The two electric motors, which have their own cooling system, are mounted
behind the rear axle. The front electric motors are mounted on the front axle,
with their cooling system arranged in front of them. This special package,
which features a 42:58 weight distribution, ensures perfect balance, which
contributes to the driving dynamics of the e-tron.

Systematic lightweight construction is an even more important prerequisite for
efficiency and range with electric vehicles than for conventionally powered
automobiles. The Audi development engineers drew on the core competence of the
company for the e-tron. The body structure is based on Audi Space Frame (ASF)
technology and was realized as a hybrid construction. All add-on parts -
doors, covers, sidewalls and roof - are made of a fiber-reinforced plastic.

The combination of aluminum and carbon fiber-reinforced composite material
guarantees supreme rigidity coupled with low weight. Audi will soon use this
technology in a similar form for production vehicles. Despite the complex
drive system layout with four electric motors and a high-capacity battery
system, the total weight of the Audi e-tron is only around 1,600 kilograms
(3,527.40 lb).

Interior and Control Concept

Optical and functional references to the new drive concept characterize the
interior design. They establish an advanced connection between proven Audi
genes and new formal hallmarks. Typical for the Audi design language is the
reduction of the architecture, controls and flow of information to the
essential in favor of visible lightweight construction and a tidy overall
impression.

The dash appears to float and has a curve that extends laterally into the door
panels. With no need to allow for a transmission, shifter and cardan tunnel,
the designers took advantage of the opportunity to create a particularly slim
and lightweight center tunnel and center console. The flush gear selector,
with which the driver chooses between the modes forward, reverse and neutral,
emerges from the tunnel when the vehicle is started.

The cockpit of the e-tron is also oriented toward the driver - a further
characteristic Audi trait. Instead of the classic instrument cluster, the
concept car is the first Audi to be equipped with a large, fold-out central
display with integrated MMI functions. It is flanked by two round dials.

The MMI is controlled via a scroll pad with a touch-sensitive surface on the
steering wheel ("MMI touch") - an element inspired by modern smartphones.

While an analog speedometer on the right provides speed information, the
instrument on the left tells the driver how much power is being drawn. The
central display shows the range in the status bar and presents all key
information from the infotainment and navigation systems. It also provides the
driver with relevant data from the vehicle's communication with its
surroundings. The instruments combine the analog and the digital worlds into a
single unit.

Characteristic for the concept of the Audi e-tron is the near total
elimination of switches and small components such as the ignition. The climate
control unit is located to the right above the steering wheel. The display
provides temperature and ventilation information. Again drawing inspiration
from a smartphone, the system is controlled by means of a touch-sensitive
sliding control.

The racing-inspired lightweight bucket seats combine excellent lateral support
with comfort. Contrasting colors - snow white and cognac - delineate the
various zones of the interior. The colors and the high-quality materials
combine elegance and sportiness.

Drive System and Energy Supply

Four asynchronous motors with a total output of 230 kilowatts (313 hp) give
the Audi e-tron the performance of a high-output sports car. The concept car
can accelerate from 0 to 100 km/h (0 - 62.14 mph) in 4.8 seconds if necessary,
and goes from 60 to 120 km/h (37.28 - 74.56 mph) in 4.1 seconds. The torque
flows selectively to the wheels based on the driving situation and the
condition of the road surface, resulting in outstanding traction and handling.

The top speed is limited to 200 km/h (124.27 mph), as the amount of energy
required by the electric motors increases disproportionately to speed. The
range in the NECD combined cycle is approximately 248 kilometers (154 miles).
This good value is made possible by the integrated concept: technology
specially configured for the electric drive system combined with
state-of-the-art battery technology. The battery block has a total energy
content of roughly 53 kilowatt hours, with the usable portion thereof
restricted to 42.4 kWh in the interest of service life. Audi uses liquid
cooling for the batteries.

The energy storage unit is charged with household current (230 volts, 16
amperes) via a cable and a plug. The socket is behind a cover at the back of
the car. With the battery fully discharged, the charging time is between 6 and
8 hours. A high voltage (400 volts, 63 amperes) reduces this to just around
2.5 hours. The Audi engineers are working on a wireless solution to make
charging more convenient. The inductive charging station, which can be placed
in the garage at home or also in special parking garages, is activated
automatically when the vehicle is docked. Such technology is already used
today in a similar form to charge electric toothbrushes.

The battery is charged not only when the car is stationary, but also when it
is in motion. The keyword here is recuperation. This form of energy recovery
and return to the battery is already available today in a number of Audi
production models. During braking, the alternator converts the kinetic energy
into electrical energy, which it then feeds into the onboard electrical
system.

The Audi e-tron, which is slowed by four lightweight ceramic brake discs,
takes the next large step into the future. An electronic brake system makes it
possible to tap into the recuperation potential of the electric motors. A
hydraulic fixed-caliper brake is mounted on the front axle, with two novel
electrically-actuated floating-caliper brakes mounted on the rear axle. These
floating calipers are actuated not by any mechanical or hydraulic transfer
elements, but rather by wire ("brake by wire"). In addition, this eliminates
frictional losses due to residual slip when the brakes are not being applied.

This decoupling of the brake pedal enables the e-tron's electric motors to
convert all of the braking energy into electricity and recover it. The
electromechanical brake system is only activated if greater deceleration is
required. These control actions are unnoticeable to the driver, who feels only
a predictable and constant pedal feel as with a hydraulic brake system.

Making its Automotive Debut: The Heat Pump

The heat pump - used here for the first time ever in an automobile - also
serves to increase efficiency and range. Unlike a combustion engine, the
electric drive system may not produce enough waste heat under all operating
conditions to effectively heat the interior. Other electric vehicles are
equipped with electric supplemental heaters, which consume a relatively large
amount of energy. The heat pump used by Audi - and commonly used in buildings
- is a highly efficient machine that uses mechanical work to provide heat with
a minimum input of energy.

A high-efficiency climate control system is used to cool the interior. It
works together with the thermal management system to also control the
temperature of the high-voltage battery. The battery, the power electronics
and the electric motors must be kept at their respective ideal operating
temperatures to achieve optimal performance and range.

As soon as the vehicle is connected to a charging station the vehicle is
preconditioned as appropriate by the thermal management and other associated
systems.

The drive system is heated if temperatures are cool, and cooled if hot. This
preconditioning can also be extended to the interior, if necessary, so that
the passengers can step into a cabin that has been heated or cooled as
appropriate for their comfort.

Driving Dynamics

The normal distribution of the tractive power is clearly biased toward the
rear axle in accordance with the weight distribution of the e-tron. Similarly
to a mid-engined sports car, roughly 70 percent of the power goes the rear and
30 percent to the front. If an axle slips, this balance can be varied by means
of the four centrally controlled electric motors. The electric vehicle from
Audi thus enjoys all of the advantages of quattro technology.

The four individual motors, which in the interest of greater traction are
installed behind the wheels as wheel drives, also enable the e-tron's lateral
dynamics to be intelligently controlled. Similar to what the sport
differential does in conventional quattro vehicles, torque vectoring - the
targeted acceleration of individual wheels - makes the e-tron even more
dynamic while simultaneously enhancing driving safety. Understeer and
oversteer can be corrected by not only targeted activation of the brakes, but
also by precise increases in power lasting just a few milliseconds. The
concept car remains extremely neutral even under great lateral acceleration
and hustles through corners as if on the proverbial rails.

The chassis has triangular double wishbones at the front axle and trapezoidal
wishbones made of forged aluminum components at the rear axle - a geometry
that has proven in motorsports to be the optimal prerequisite for high
agility, uncompromising precision and precisely defined self-steering
behavior. A taut setup was chosen for the springs and shock absorbers, but it
is still very comfortable.

The direct rack-and-pinion steering gives finely differentiated feedback. Its
electromechanical steering boost varies with speed, so that the e-tron only
has to provide energy while steering, and not while driving straight ahead.

As befitting its status, the Audi concept car rolls on 19-inch tires with a
new blade design. 235/35 tires up front and 295/30 tires in the rear provide
the necessary grip.

Car-to-x Communication

The electronics development engineers at Audi not only aimed to make the
e-tron as efficient and fun to drive as possible, they were also very
concerned with safety and traffic management. The technical concept car
includes a prototype of an information processing system. Future generations
of these systems will usher in a new era in the networking of road traffic,
particularly in regions and countries with a high volume of traffic. This
progress is made possible by the rapid advancements in computing power,
software and communication technology.

The buzzword "car-to-x communication" refers to the direct exchange of
information in flowing traffic and to the traffic environment. The letter "x"
is a free variable that can refer just as easily to other vehicles as to fixed
infrastructure such as traffic lights. In contrast to today's telematic
systems, car-to-x communication no longer requires a central service provider
to quickly and effectively pool and process information. The participants
themselves perform these tasks by spontaneously networking with one another.

The future car-to-x network still needs some time before it becomes reality on
the roads. This obstacle is one that can be overcome, however, as nearly every
carmaker in Europe, the U.S. and Japan have decided to develop a common
standard for hardware and software. Once all new cars are equipped with this
technology, a functional network of automotive transmitters will soon be
available, at least in large population centers.

These transmitters can be used to open up many new practical applications.
Below are just four examples showing the possibilities offered by car-to-x
communication.

Example 1 - Efficiency and range: Numerous external factors influence energy
consumption and thus the range of any vehicle. An intelligent vehicle equipped
with car-to-x technology is aware of necessary braking or acceleration
maneuvers in advance because it combines navigational data with information
about the flow of traffic, for example. The central computer can prevent
driver actions that would use energy unnecessarily or use targeted braking for
recuperation of the battery.

Example 2 - Safety: A vehicle has spun out on a slippery road in a blind curve
and is unable to free itself under its own power. At the same time, other
vehicles are approaching quickly. The stuck vehicle uses car-to-x to send out
a warning signal reporting the precise location of the hazardous location. A
corresponding warning then appears on the navigation system display of the
approaching cars.

Example 3 - Traffic flow: Many cars are traveling between traffic lights on an
arterial road. Over and over again, they accelerate only to have to brake
again when the traffic light changes to red. Car-to-x technology enables them
to establish a network between themselves and receive information from the
traffic light controller. The drivers can then make more judicious use of the
gas pedal because they know what to expect. The same applies for imminent
traffic jams: cars ahead provide information that results in adjustments to
the posted speed limits, noticeably spreading out the traffic.

Example 4 - Convenience: The driver has entered a shopping center with a
chronic shortage of parking spaces into his navigation system as the
destination. With car-to-x, the mobile system networks with the parking space
registration system at the destination. When the system in the parking garage
reports that a convenient parking spot is available, the navigation system can
register its location and also reserve the spot.

Photos

To download high-resolution photos of the Audi e-tron high-performance sports
car concept study please visit the Audi of America media site,
www.audiusanews.com .

ABOUT AUDI

Audi of America Inc. and its 270 dealers offer a full line of
German-engineered luxury vehicles. The Audi lineup is one of the freshest in
the industry with 23 models, including 12 models launched during model years
2008 and 2009. Audi is among the most successful luxury automotive brands
globally. In selling one million vehicles worldwide in 2008, AUDI AG recorded
its 13th consecutive record year for sales growth. Visit www.audiusa.com or
www.audiusanews.com for more information regarding Audi vehicle and business
issues.

SOURCE  Audi

Jeff Kuhlman, +1-703-364-7423, Mob.: +1-248-622-3703, [email protected],
or Brad Stertz, +1-703-364-7440, Mob.: +1-703-344-1320, [email protected],
both of Audi of America